Unisex Herringbone Set Free Crochet Pattern

In this post I want to share with you the Unisex Herringbone Set Free Crochet Pattern.  It is hard to find crochet patterns that are just for boys and men so I found a perfect crochet stitch that creates a unique design that can be used for men and women, the Herringbone Half Double Crochet.

Unisex Herringbone Set

This post contains affiliate links.  If you make a purchase using these links I may receive compensation (at no added cost to you.)

Be sure to sign up to my Newsletter so you can be notified when this happens!  As a new subscriber you will receive a free pdf crochet pattern.  You can find out more about me and the steps you would need to follow for signing up on my Newsletter Incentive page on my website.

[yikes-mailchimp form=”1″]

 

In the Herringbone Crochet Set you will find crochet patterns for a Beanie and a Cowl.  You will also find 3 sizes to choose from:  Teen, Small & Large Adult.  The good thing about this crochet pattern is that it can be customized to fit your style, size, and color!  The stitch count is a multiple of 6, so it you want to make a smaller or larger size, you can use the multiple of 6.

As I stated above, the Unisex Herringbone Set Free Crochet Pattern is a great crochet pattern boys, men, and women.  My husband and I modeled the set, so as you can see it fits men and women.  You will find some wonderful versions from my testers of the set at the bottom of this post.

You can also find the ad-free pdf  Unisex Herringbone Set crochet pattern at my Ravelry Store or LoveCrafts or my Etsy Shop.

 

 

You can find my ad-free pdc crochet patterns at these locations listed below.

Ravelry
Lovecraft
Etsy

**********************************************************

Materials Needed:
US Hook I/5.5 mm
100-300 yards of #4 Worsted Weight Yarn
Scissors
Tapestry Needle

Gauge:
US Hook I/5.5 mm
8 HHDC x 6 Rows = 2 inch

Notes:
Ch 1 does not count as a stitch

Gauge Swatch:
R1:  Ch 9, sc in 2nd st and sc in each st across. Ch1
R2:  Turn.  HHDC in each st across.  Ch 1
R3-6:  Repeat R2

Abbreviations:
CH = Chain
Sl St = Slip Stitch
SC = Single Crochet
BLO = Back Loop Only
HHDC = Herringbone Half Double Crochet
SC BLO = Single Crochet in Back Loop Only
HDC2TOG = Half Double Crochet 2 Together
FHDC = Foundation Half Double Crochet

Special Stitches:

To make the HHDC stitch:
1. Yarn over, insert hook into the next stitch and pull up a loop (3 loops on hook)
2. Pull first loop straight through the second (similar to a slip stitch)
3. Yarn over, pull through two remaining loops on hook. 

Special Notes:
The stitch count is a multiple of 6 if you need a smaller or larger size.
Pattern written for: Teen, Sm Adult, Lg Adult
Be sure to count your stitches once and awhile.  It is important once you start the decreasing to have the right stitch count.

Video Tutorials:
YouTube Video Tutorial for HHDC  here
YouTube Video Tutorial for SC in BLO here.
YouTube Video Tutorial for HDC2TOG here.
YouTube Video Tutorial for FHDC here.

 

You can find the ad-free pdf  Unisex Herringbone Set crochet pattern at my Ravelry Store or LoveCrafts or my Etsy Shop.  There is an additional crochet pattern for matching fingerless gloves that you can find at my stores as well.

 

Brim

R1:  Chain 11,  SC in the 2nd chain and each ch across.  Ch 1 and Turn.  10 SC

R2:  sc in 1st st, sc in blo in the next 8 st, and sc in the last st.  Ch 1 and Turn.  10 SC

R3:  Repeat R2 for a total of 54 (60, 66) Rows

Join Brim:  Holding both ends together without twisting, sl st together through blo loop of the previous row and foundation row.

 

Body

R1:  Ch 1, work HHDC across the side of each row, sl st in 1st HHDC st to join.  Ch 1 and Turn.  54 (60, 66)

R2:  HHDC in the 1st st and in each st around.  sl st in 1st HHDC to join.  Ch 1 and Turn.  54 (60, 66)

R3:  HHDC in each remaining st around.  sl st in 1st HHDC to join.  Ch 1 and Turn.  54 (60, 66)

Repeat R2-R3 until hat measures 6 – 6.5”  ( 6.5 – 7” or 7 – 7.5”) inches, including the Brim.  Move on to Decrease Rows.

 

Decrease Rows  

R1:  Ch 1 and Turn. * HHDC in the next 6 (8,9) st, HDC2TOG*  Repeat from * to * around.  sl st into 1st to join.  Ch 1 and Turn.  48 , 54, 60  stitches

R2:  *HHDC in the next 5 (7, 8) st, HDC2TOG*  Repeat from * to * around.  sl st  into 1st st join.  Ch 1 and Turn.  40 (48, 54) st

R3:  HHDC in the next 4 (6, 7) st, HDC2TOG*  Repeat from * to * around.  sl st into 1st st join.  Ch 1 and Turn.  34 (42, 48) st

R4:  HHDC in the next 3 (5, 6) st, HDC2TOG*  Repeat from * to * around.  sl st into 1st st join.  28 (36, 42) st  Do not fasten off.

Leave a long tail of 6-10 inches for weaving the top of the hat closed.  You will weave the top of the Beanie closed by using your Tapestry Needle.  

You will go into the 2 loops created by the dc using the long tail you have left.  You will go back and forth weaving the long tail between the 2 loops until you reach the end.  

At the end you will pull the long tail tight, closing the top of the Beanie.  Pull tight and go into the 1st st and create a knot, tying off the long tail.   

If you are having trouble here is the YouTube Video Tutorial showing the process.   

Fasten off and weave in ends.

 

You can find the ad-free pdf crochet pattern at my Ravelry Store or LoveCrafts or my Etsy Shop.

 

 

Herring-Bone Cowl

R1:  FHDC 14 (16, 18) 

Optional:  Chain 16 (18, 20) hdc in the 4th chain and each remaining stitch.     Turn  14 (16, 18)

R2:  Ch 1.  HHDC in 1st st and remaining stitches across.   Turn  14 (16, 18)

R3:  Ch 1.  HHDC in 1st st and remaining stitches across.  Turn  14 (16, 18)

Body of Scarf

R4:  Ch 1.  HHDC in 1st st and remaining stitches across.  Turn  14 (16, 18) 

Repeat R4 until the scarf measures 44”  ( 56”, 68”) inches or until your desired length.  If you would like to leave it as a Scarf, fasten off and weave in the ends.  For the Cowl, do not fasten off, move to the closing of the cowl.

 

Closing the Cowl

R1:  Ch 1 and place HDC in each st across.   14 (16, 18)

Join Ends:  Holding both ends together without twisting, sl st together through blo loop of the previous row and foundation row.

Fasten off and weave in ends.  You are done!

 

 

 

As you can see above the different versions of the Unisex Herringbone Set Free Crochet Pattern from my wonderful testers!  Thanks a  bunch ladies!

**********************************************************

Again, be sure to sign up to my Newsletter so you can be notified when this happens!  As a new subscriber you will receive a free pdf crochet pattern.  You can find out more about me and the steps you would need to follow for signing up on my Newsletter Incentive page on my website.

[yikes-mailchimp form=”1″]

**********************************************************

 

You can find my crochet patterns at these locations listed below.

Ravelry
Lovecraft
Etsy

**********************************************************

Find me, Jo of Jo’s Crafty Hook at the places listed below.

Website
Ravelry
Instagram
LoveCrafts
Etsy Shop
Facebook Group
Jo’s Crafty Hookers
Facebook Page Jo’s Crafty Hook
Facebook Page Jo’s Crafty Hook Designs
Pinterest
Twitter
YouTube
 Donations Accepted